BCLZT - INTERCLENE EXTRA RED OFFSHORE ANTIFOULING

  • MSDS: BCLZT
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: INTERCLENE EXTRA RED OFFSHORE ANTIFOULING
  • National Stock Number: 8010-00N006127
Product Identification

Product ID:INTERCLENE EXTRA RED OFFSHORE ANTIFOULING
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006127
MSDS Number: BCLZT

Responsible Party
INTERNATIONAL PAINT CO., INC.
220 S LINDEN AVE
SOUTH SAN FRANCISCO, CA 94080-6411
US

Cage: 1M431

Contractor
INTERNATIONAL PAINT CO INC
SOUTH SAN FRANCISCO, CA 94080-6411 US

Cage: 1M431

Ingredients

CUPROUS OXIDE; COPPER AS CU 86%. TLV IS FOR FUME.

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 45%

ACGIH TLV: 0.1 MG/CUM, MFR


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 9.32%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 6.45%

OSHA PEL 100 PPM


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 1.78%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

Hazards

Effects of Overexposure:INHAL:IRRIT OF RESP TRACT, HDCH,DIZZ. SKIN &
EYES:PRIMARY IRRIT.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR AWAY FROM EXPOSURE. EYES:FLUSH IMMED
W/COPIOUS QUANTITIES OF RUNNING WATER 15 MINS. CALL MD. SKIN:WASH
AFFECTED AREA W/WATER. REMOVE CONTAMINATED CLOTHING. WASH BEFORE
REUSE.

Fire Fighting

Flash Point:83F,28C CC
Lower Limits:0.77
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL TO SMOTHER THE FLAMES.
Fire Fighting Procedures:USE WATER TO COOL UNOPENED CNTNRS IN VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENTS. DO NOT USE
IN AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID PROLONGED
INHAL OF VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT MATL.

Handling

Handling and Storage Precautions:STORE IN BLDGS DESIGNED & PROTECTED
FOR STORAGE OF NFPA CLASS 1C FLAMMABLE LIQUIDS.
Other Precautions:IF MATERIAL IS SUBJECTED TO EXCESSIVE HEAT SUCH AS
THAT PRODUCED BY WELDING OR FLAME CUTTING, IRRIT FUMES WILL BE
EMITTED & PRECAUTIONS SHOULD BE TAKEN TO AVOID INHAL OF THESE
VAPORS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD FOR EXPOS OF CONCERN.
Ventilation:GEN DILUT/LOC EXHST ADEQUATE TO KEEP LEVELS BELOW TLV &
LEL.
Protective Gloves:REQD:LONG EXPOS
Eye Protection:SFTY GLASS W/SPLASH GUARD
Other Protective Equipment:AS NEEDED TO PRVNT PROLONGED SKIN CNTCT
W/CONTAM CLTHNG.
Supplemental Safety and Health
BP:138-204C. VAP PRESS:2.0 FOR MINERAL SPIRITS TO 42.0 FOR ETHANOL.
WEIGHT PER GALLON:14.7 LBS.

Chemical Properties

Boiling Pt:B.P. Text:281-400F
Vapor Density:>1.0
Evaporation Rate & Reference:<1.0, ETHER
Appearance and Odor:FLAMMABLE LIQUID PAINT
Percent Volatiles by Volume:37.5

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, CU FUME

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.